Ways of Bandaging Casting Tape
Bandaging the wound with casting tape is to fix the gauze covered the wound, fix the fracture or contusion, as well as stop bleeding and protect the lesion.
Keys of operation:
1. Loop method. This method is used towards the wrist and physical parts of the same thickness. First of all, overlap the casting tape like a loop. The first lap is a little oblique; the second and third ones are circular, and press the corner of the oblique first lap into the circle; finally, use paste to fix the end, or cut the end of the tape into two, and then tie together;
2. Snakelike method. This method is used to fix the splint. First bandage the casting tape several times in loop method. And wind the casting tape sideling with an interval of the width of the casting tape;
3. Spiral method. This method is often used in the physical parts of the same thickness. First bandage the casting tape several times in loop method. The later circle should cover one-third or two-thirds of the former one in spiral method.
